Hi all
before wasting time , just wondering whether I can use the left hand (clutch side) crankcase cover from a 250 twin on the 500 . Also can I presume that the flywheel is also interchangeable?
500 seiv / 250 crankcase compatability
-
- Posts: 16
- Joined: 17 Sep 2007 10:15
- Location: London
-
- Posts: 16
- Joined: 17 Sep 2007 10:15
- Location: London
My 350 is running a 250 stator and the 250 was running a 350 stator. I'd swapped them whilst chasing an ignition problem and never swapped them back.
You do have to watch for the early narrow rotor (fully machined, salient poles). It can only be used with the narrow stator, but you can mix the other way.
I'm pretty sure the later rotors (cast, domed shape) are all the same. The next upgrade was to the single (rather than split) phase winding and appropriate regulator.
You do have to watch for the early narrow rotor (fully machined, salient poles). It can only be used with the narrow stator, but you can mix the other way.
I'm pretty sure the later rotors (cast, domed shape) are all the same. The next upgrade was to the single (rather than split) phase winding and appropriate regulator.
Paul Compton
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru
http://www.morini-mania.co.uk
http://www.youtube.com/user/EVguru