Hi,
That's a really good job! Very neat finish.
May I ask what you used to paint the cases with?
Thanks
Mark
R/H side cover needed
Re: R/H side cover needed
Hi Mark,
This time I have tried Auto Extreme stain black rattle can which claims to be petrol resistant, will have to see. I used a high temp paint PJ1 on my Kanguro rebuild which melted at the first spill of fuel.
This time I have tried Auto Extreme stain black rattle can which claims to be petrol resistant, will have to see. I used a high temp paint PJ1 on my Kanguro rebuild which melted at the first spill of fuel.
- Attachments
-
- Paint.jpg (47.71 KiB) Viewed 3033 times
-
- Posts: 1407
- Joined: 12 Nov 2007 23:44
- Location: Leicestershire
Re: R/H side cover needed
Yes that is a good repair-it's hard to hide that sort of work well. Did you notice any warping of the casing after the welding? I'm asking as the casing on my Camel has been welded and it is sometimes awkward to get it seated on the two dowels. I suppose it would need to be very badly distorted before the starter operation begins to suffer. i.e. when the shoes are not properly aligned with the flywheel drum?
All donations to the rest home for old Camels, Leicestershire.
Re: R/H side cover needed
The top dowel hole was just slightly tighter than before but not really a problem.