Re: Runs on one hot
Posted: 26 Apr 2019 07:33
Mark....
Yes it was the rear cylinder that was not firing when the engine heated up ( that's what I meant by hot). Then eventually couldn't get it started at all....even on a good push start
It's not the case that one cylinder was running hotter
Initially I had replaced the black pick up with a new one ....also used a friends 3.5 stator and rotor to eliminate that as a problem.
I am going to order the Tritsch transducers and put the diode in series as advised.
Thanks again to everyone who took the time to share their knowledge with me
Yes it was the rear cylinder that was not firing when the engine heated up ( that's what I meant by hot). Then eventually couldn't get it started at all....even on a good push start
It's not the case that one cylinder was running hotter
Initially I had replaced the black pick up with a new one ....also used a friends 3.5 stator and rotor to eliminate that as a problem.
I am going to order the Tritsch transducers and put the diode in series as advised.
Thanks again to everyone who took the time to share their knowledge with me